NAUTIC MULTI is a polyester adhesive for professional use in the construction of yachts, boats, canoes, caravans and other laminate structures. NAUTIC MULTI is a universal adhesive and may be used both as a resistant assembly adhesive and for sandwich constructions. It has a low mass density (NAUTIC MULTI 15: 0.89 g/cm3, NAUTIC MULTI 30: 0.85 g/cm3) and excellent adhesive properties with different types of substrates. A carefully chosen thixotropy makes it possible to apply it in thick layers (even up to 3 cm), at the same time ensuring a good pore penetration of foams used in sandwich constructions.
NAUTIC MULTI is available in two versions: Nautic Multi 15 and Nautic Multi 30. They differ in gelation time (15 and 30 minutes, respectively). The versions Nautic Multi 15W and Nautic Multi 30W are equipped with a colour change indicator that shows if the adhesive has been properly mixed with the hardener.
Substrates: - Caution: The filler should not be applied directly on one-component acrylic and nitrocellulose products. Surface preparation: -
polyester and epoxy laminates: degrease, dry grind P80 – P120, degrease again with a silicone remover,
plywood, wood: dry grind P80 – P120, then remove dust.
Mixing ratio: NAUTIC MULTI – 100 parts by weight, Hardener – 1 to 2 parts by weight. Supplementary products: Hardener – methyl ethyl ketone peroxide (e.g. METOX 50). Application life after mixing with the hardener: NAUTIC MULTI 15: 10 to 20 minutes at 20°C (hardener: 2 %). NAUTIC MULTI 30: 30 to 40 minutes at 20°C (hardener: 2 %). Curing time: NAUTIC MULTI 15: 1.5 to 2 hours at 20°C (hardener: 2 %). NAUTIC MULTI 30: 2 to 3 hours at 20°C (hardener: 2 %). Colour: NAUTIC MULTI 15 – light green NAUTIC MULTI 30 – pistachio Coatability: Polyester finishing filler, polyester spray filler, acrylic primers. Procedure: Mix the components thoroughly. Observe the required amount of hardener. Apply a layer not thicker than 10 mm with a trowel. The viscosity of the cured surface improves the adhesion of the following layers. If needed, it may be removed with an NC solvent. Minimal application temperature: +10°C.
Resistance tests have been carried out according to the norm PN EN-ISO 527.
Polish Register of Shipping (PRS) approval: No. TT/1223/710250/07 Equipment cleaning: NC solvent. Storage conditions and shelf life: Store in a dry and cool place, away from sources of fire and heat. Avoid direct exposure to sunlight. Adhesive: 6 months at 20°C. Safety requirements: See the Safety Data Sheet of the product in question. Packaging: The adhesive is delivered in unit packages individually agreed upon with the customer. Other informations: The effectiveness of our systems results from laboratory research and many years of experience. The data contained herein meets the current knowledge about our products and their application potential. We ensure high quality, provided the user follows the instructions and the work is performed in accordance with good workmanship. It is necessary to do a test application of the product due to its potentially different reaction with different materials. We may not be held liable for defects if the final resultwas affected by factors beyond our control.
SCOTT RANDOLPH, ORANGE COUNTY TAX COLLECTOR Local Business Tax Department 201 South Rosalind Avenue Second Floor PAIN MANAGEMENT CLINIC AFFIDAVIT (FOR USE AS OF JANUARY 18, 2013) PMC state registration number, if applicable: _____________________________________________ In accordance with Section 38-1, Orange County Code, a Pain Management Clinic is defined to mean any
M e l a n o c e u t i c a l S k i n B r i g h t e n i n g s y s t e m ALL BRIGHT AND EVEN For all over face and body brightening This skin brightening and lightening face and body cream is ideal for use all over the body. Can be used on the face, neck, elbows, dark knuckles or hands, in between thighs, knee’s, etc. Contains NO irritating ingredients such as alpha hydroxy acids, therefore