November 15th WELCOMING RECEPTION OPENING CEREMONY Prof. Uttandaraman Sundararaj Prof. G.W.M. Peters PLENARY LECTURE: Crystallization Kinetics of Semi-Crystalline Polymers: from Processing to Properties Persian Gulf Meeting Hall Avicenna Meeting Hall Razi Meeting Hall Kharazmi Meeting Hall Abu Reyhan Meeting Hall Mollasadra Meeting Hall Morphology and Microstructure Bio Polymers and Polymers from Polymer Nanocomposites Rheology and Rheometry Fibers, Films and Membranes Process Modeling and Simulation Development Renewable Resources KEYNOTE LECTURE
Yasser Zare, Hamid Garmabi, Farhad Sharif
KEYNOTE LECTURE KEYNOTE LECTURE KEYNOTE LECTURE
Nonisothermal Crystallization and Melting
Modification of Melt Spinning Process for
Polymers and Copolymers onto Planar and Structure of Linear Polyethylene: Rheology
the Preparation of High-performance Fibers
Rheological Study of Heavy Crude Oils and
and thermo-oxidative stabilities of LLDPE
A. Rostami, H. Nazockdast, M. Karimi, M.
Simulation of polymer-diluent flow field in
Preparation and Properties of Tetracycline
Effect of nano-particles on the recovery of
the Role of Nanoclay on Processability and rheological and thermodynamic approaches Characteristic of Nano fiber and application
spinneret in fabrication of hollow fiber
polymer nano-composites in the melt state
in predicting the core-shell morphology of
A. Bigdeli , H. Nazockdast, A.S. Rashidi,
R. Lesan-Khosh, R. Bagheri and S. Asgari
Nanoindentation of Isotactic Polypropylene:
The Influence of Nanoclay Partitioning on
The effect of annealing environment on the
Microstructural Properties and Fibrillation Fabrication of a biopolymer fibrous scaffold
chemical reactivity on the morphology and
Gelation Polymer Containing Ciprofloxacin-
Polymer Blends Stabilized by Hydrophobic
Kinetics over Heterogeneous Ziegler-Natta
the rheological properties of the PP/PA6
PLGA Nanoparticles for Local Delivery of
Morphology and Electrochemical Properties
A Study on the Crystallization and Thermal
of Electrospun Polymer Electrolyte Based
Properties and Morphology Development of on PVdF/PAN Blend for Lithium Polymer
hydrogels and their drug release behavior
Application of Rheology on Evaluating of
The effect of electrospinning duration on
The effect of different flow fields on particle
Fractal Characteristics of Phase Separation
some physical and mechanical properties of
size distribution (PSD) in suspensions using
Prof. G.W.M. Peters Prof. Patrick Anderson PLENARY LECTURE: Analysis and Optimization of Mixing inside Intermeshing Co-Rotating Twin- Screw Extruders KEYNOTE LECTURE KEYNOTE LECTURE KEYNOTE LECTURE
resistivity and microstructure of Styrene-
study temperature effect on flow behavior of
films and membranes by a simple Artificial
The Effects of Miscibility on the Dynamic
Thermal stability and flame retardancy of
Study of Electrospinning Process: Effect of
Flow simulation of fiber reinforced rubber
Uniaxial Extensional Behavior of Ziegler-
Hydroxylated Polylactic Acid (PLA-OH) by
Morphological study of polyamide-6/silane-
Characterization of a novel in-situ gelling
grafted-high density polyethylene/nanoclay
thermosensitive composite hydrogel based
M. Dehghan Niri, M.A. Tavanaie, M. Hatami
based Micromechanics using Finite Element
The role of nano clay surface modifier in
Shear Rheology of Blends of a Linear and a
Activity and Barrier Properties Based on
Modeling and Simulation of Dimethyl Ether
Microstructure and Rheological Behavior of
EVA/organoclay Based Hot Melt Adhesives.
The effect of high-energy electron beam on
An investigation of structural changes in
November 16th Prof. Patrick Anderson Prof. Uttandaraman Sundararaj PLENARY LECTURE: Novel Electrically Conductive Polymeric Nanocomposites for Electromagnetic Shielding Applications Persian Gulf Meeting Hall Avicenna Meeting Hall Razi Meeting Hall Kharazmi Meeting Hall Abu Reyhan Meeting Hall Mollasadra Meeting Hall Morphology and Microstructure Polymer Nanocomposites Rheology and Rheometry Fibers, Films and Membranes Polymerization Process Engineering Polymer Foams Development
Ali Naderi, Saeedeh mazinani, Seyed Javad A. Mohebbi, M. Dehghani, A. Mehrabani-
KEYNOTE LECTURE KEYNOTE LECTURE KEYNOTE LECTURE
Rheological Properties of Linear Polylactide
Investigation of Synergistic Effect of the
Effect of Multi-Walled Carbon Nanotube on
Application of In-situ polymerization in
Environmentally-benign polymer foaming -
Evaluation of molecular interaction between
copolymer by means of thermal analysis.
R. Bahrami, M. Stumpf, F. Wolff-Fabris, V.
Sarah Hashemi Astaneh, Fatemeh Goharpey M. M. Abolhasani, A. Jalali, H. Nazockdast
The Effect of Structural Parameters on the
containing polymer on crystalline structure
reactor Alloy Synthesized by Multi-stage
presence of different core-shell particles
Mahboobe Mohammadi Nasrabadi, Hamid Mojtaba Koosha, Hamid Mirzadeh, Yousef
M. Najafi, M. Salami-Kalajahi, N. Reshad, Nemat J. Hossieny, Mohammadreza Nofar,
An Investigation of the Effects of Layered-
The Effects of Structural Dispersities on
Study of pressure and temperature effects
Effect of Hard Segment Distribution on the
silicate on Morphology, Permeability and
Electron Beam Irradiated Polypropylene-co-
on the gas separation properties of a novel
Mehdi Karimi, Ali Nematollahzadeh, Akbar
Polycaprolactone / Polyhedral Oligomeric
Simulation of the Crystallinity Effect on
Effects of Different Synthesis Conditions on
Synthesis of polymeric beads with tunable
Microcellular Foams by Solid-State Batch
Homayoon Hosseinkhanli, Alireza Sharif, Mehdi Salami-Kalajahi, Vahid Haddadi-Asl,
Synthesis and Characterization of Aqueous
The Evaluation of Nanoclay Distribution in
Study on the effect of remodification of
Thermal conductivity, microstructure and
Nanocomposites Prepared via In situ Free
mechanical properties of rigid polyurethane
Hybrids as Potential Source of Transparent
Heterogeneous nucleation in a continuous
Application of polyaniline nanofibers in
Feather Keratin/Nylon 6 Blend as Deduced
foaming of Polystyrene using nanosilica as a
electrocatalytic reduction of nitrate ions
Study on the role of multiwall carbon nano-
Production of Nanocomposite Microcellular
polyethylene glycol via self-assembly of
O.Moini Jazani, A.Arefazar*, S.H.Jafari,
Synthesis and characterization of sulfonated
An Experimental Investigation of Ballistic
nanoparticles via surface-initiated free
properties of hollow particle filled polymers
Prof. Takeshi Kikutani Prof. Evan Mitsoulis PLENARY LECTURE: Polymer Processing in 2011: Where Do We St Polymer Nanocomposites Polymer Blends and Alloys Polymer Composites Fibers, Films and Membranes Polymerization Process Engineering Polymer Foams KEYNOTE LECTURE KEYNOTE LECTURE KEYNOTE LECTURE
The use of conventional, gamma and click
Dispersion of Carbon Nanotubes in Binary
routes in combination with sol gel chemistry
Preparation and characterization of PVDF
Influence of Nanoparticles on the Thermal
Study on the Mechano-Optical behavior of
Properties, Morphology and Particle Size
perforation in polymer composite materials
POLYMER NANOCOMPOSITES Polymer Blends and Alloys Polymer Composites Injection Molding and Molds Polymerization Process Engineering Polymer Foams
Numerical investigation of the effect of
The effect of foam processing conditions on
different poly angles on crashworthiness
EXINMOLD - a design support software for In Situ Copolymerization of Ethylene with
trimerization Catalyst and Cp2(Ind)2ZrCl2
N. Sedaghat, S.H. Jafari, M.R. Kalaee, M.R.
Correlation of Morphology and the Thermal-
The Effects of NanoClay Particles Addition
Investigation of cured shapes of trapezoid
Propylene Polymerization behavior of Bis(2-
M. Emami, J. Vlachopoulos, E. Takacs, M.R
Finite element simulation of high velocity
Simulation of hot runner system effect on
TiO2-filled polyimide nanocomposite films
Collagen nanofibers and their applications
injection molding process in compare with
synthesized by an in situ polymerization
Fatemeh Rekabdar, Mehdi abdollahi, Akbar
Characterization of Ethylene –Propylene
Toughening Behavior and Microstructure Silylation of Organoclay (Cloisite 30B) with
Effects of Poly(ethylene glycol) Length on The Effect of Processing Parameters on the
of Treated Multi-walled Carbon Nanotubes
The Effect of Clay on the Ablation Behavior
Effect of organoclay and curing agent on the
November 17th Prof. Petr Saha Prof. Pierre Carreau PLENARY LECTURE: Coalescence in Thermoplastic Polymer Blends Persian Gulf Meeting Hall Avicenna Meeting Hall Razi Meeting Hall Kharazmi Meeting Hall Abu Reyhan Meeting Hall Mollasadra Meeting Hall Applications of Polymers in Petroleum Polymer Blends and Alloys Polymer Composites Miscellaneous Polymerization Process Engineering Surface Coatings Industries
S. A. Fathi, R. Gouttefarde, F. Wolff Fabris,
KEYNOTE LECTURE KEYNOTE LECTURE KEYNOTE LECTURE
The influence of different core types and
antibacterial properties of PET/Chitosan
finishing options on the shear properties of
sandwich structures under static loadings
M. A. Aravand , L. Gorbatikh, S. V. Lomov,
Polypropylene: key trends and word market
Influence of Rubber Concentration on the
The Effect of Different Emulsifiers on the
Microstructure and Performance Properties
Influence of Temperature and Salt on the
Study on optimal parameters of unit cell for
Ali Esmailzadeh, Fatemeh Rekabdar, Mina S.M. Mirabedini, R.R. Farnood, N. Yan, I.
Mechanical and crystallization analyses of
Viscoelastic Behavior of the Polyacrylamide
Mechanical and Self- healing Properties of
layered silicate polyethylene terephthalate
Latex Coatings Containing Ethyl Cellulose-
A.A. Davoodi, T. Khalkhali, H. Piuos, H.
Azizollah Nodehi, Seyed-Hassan Jafari, Udo
Effect of Wood Content and Foaming agent
Application of process intensification in
Acrylic Coatings using Fluorosilane Treated
Synthesis and Characterization of Dendritic
Stability of Copolymer Grafted Bentonite
Antibacterial Polyurethanes Coatings from
Polyethylene/Starch Blend via Solid-State
Polyethylene Nanoparticles with Modulated
Constituting Balance between Stiffness vs.
(ethylene terephthalate) via the Partial
network modeling polymeric microfiltration
Glycolysis Method in order to synthesize
A. Gheshlaghi, F. Rekabdar, M. Saffarian,
M.K. Moghadam, S. Rezanejad, M. Taheri,
Investigative on the effective site exist in
Pilot-scale plant investigation of blocking
New Investigation on Effect of resin content
mechanism in oily wastewater from refinery A study on the toughening of PVC/Starch
on electrical and mechanical properties of
silica/epoxy mutifunctional nanocomposite
processes treatment by polymeric membrane
oxidation of PE films in exposure to uv-rays
Carbon Fiber and Concrete Reinfoced with
investigation of its anticorrosive properties
Persian Gulf Meeting Hall Avicenna Meeting Hall Razi Meeting Hall Kharazmi Meeting Hall Abu Reyhan Meeting Hall Mollasadra Meeting Hall Applications of Polymers in Petroleum Mixing, Compounding and Reactive Extrusion and Extrusion Processes Polymer Composites Rubber Processing Surface Coatings Industries Processing KEYNOTE LECTURE
Experimental Study on the Effect of Melt
Influence of various surface treated nano-
silica particles on the optical properties of
Poly(butylene terephtalate) Nanocomposites
K. Wilczyński, A. Nastaj, A. Lewandowski,
M. Yadollahi, H. Bouhendi, M.J. Zohurian-
on the structural and operational properties Rheological Properties of Different Rubber
Epoxy bearing acrylate coatings modified
M. Partovi Meran, M.K. Razavi Aghjeh and
Castor oil based polyurethane coatings with
Experimental study of wettability alteration Multi component melt-melt texturization as
efficient antibacterial function and high
to gas wetness using fluoroalkylsilanes in
Ahmad Nalbandi, Homayon Hossein Khanli Ahmad FAUZI MOHD NOOR, Azhar Abu
Performance of Methane Hydrate Formation Three-dimensional flow simulation inside a Thermal Shock Cycling Effect on Flexural Investigation on Physical Property Changes
Process of an Intumescent Flame Retardant
Incorporation of an Antirodent Masterbatch
for visualisation of polymer flow in twin
F. Rezaei, A.R. Zahedi, H. Shariat Panahi
Experimental Investigation and Modeling of
The Effect of Calcium Carbonate Nanofiller
An Experimental Investigation of Surface
Rheological and Mechanical Properties of
Polymer flooding simulation in one of the
DISEMINARE REZULTATE STIINTIFICE ÎN CADRUL ETAPEI ACTIVIT ILE LA PROIECT S-AU CONCRETIZAT ÎN 39 LUCR RI PUBLICATE SAU ACCEPTATE SPRE PUBLICARE I RESPECTIV 38 LUCR RI COMUNICATE, DUP CUM URMEAZ : Nr. Lucr ri publicate M. Hamcerencu, J. Desbrieres, M.Popa, A. Khoukh, G. Riess “New unsaturated derivatives of Xanthan gum: Synthesis and Polymer, 48, 7, 23 March, 1921-